The Gearstar FLEX pager is ideal for situations requiring a paging device to only alert. Hospitals, restaurants, and hotels are just a few of the many places that can conveniently use the Gearstar pager. The FLEX coding version of the pager operates in the 900 MHz band, is fully synthesized, has 6 programmable addresses and wideband channel spacing. Once paged, the Gearstar can alert with a strong audio tone, vibration, or flashing red LED’s. Of these modes, two of the three can be configured to alert at the same time.
The Gearstar POCSAG Pager was designed for situations that only require a device to alert when operating in professional or service industries like medical, hospitality, restaurant, and entertainment. When paged, the Gearstar alerts with a strong audio tone, vibration, or flashing red LED’s. Two of the three alert modes can be configured to work at the same time. The POCSAG version of the Gearstar pager is available in VHF, UHF or 900 MHz frequency bands. The Gearstar has wideband channel spacing, is fully synthesized, and has 6 programmable addresses. Up to 10 units can be stacked on one another to all charge at the same time. Rechargeable batteries will not be damaged by overcharging, and full recharge time varies from 8 to 12 hours.
The NP88 is a synthesized Numeric FLEX Pager with a 12 digit top-mounted display. Incoming messages can contain up to 20 digits and a total of 16 messages can be stored in memory. When memory fills up, 8 messages can be protected from being replaced. The NP88 FLEX Pager has wideband channel spacing, 2 capcode addresses, operates in the VHF or 900 MHz frequency bands, and runs on a single standard “AAA” battery.
The NP88 is a synthesized Numeric POCSAG Pager with a 12 digit top-mounted display. 16 messages can be stored in memory and each message can contain 20 digits. 8 of these messages can be protected from replacement when the memory becomes full. NP88 POCSAG models are operational in the VHF, UHF, or 900 MHz frequency bands, have wideband channel spacing, 2 programmable capcode addresses, and run on a single “AAA” alkaline battery.
The NP88 Pager Programmer includes a 4-pin programming fixture, a DB9 serial cable, a 5 VDC 1A power adapter, and separate programming software for FLEX or POCSAG versions of the NP88 Pager. The programming fixture and software can only be used to program the NP88 Pager and are not compatible with any other Unication pagers.
The Rechargeable Battery Pack for the UniMax Alert and Ring Tone Amplifier is an optional backup power source, or the main power source if the UniMax Amplifier is to be used in a mobile situation. Consisting of three “AA” NiMH (Nickel Metal Hydride) rechargeable batteries, the Battery Pack takes approximately 10 hours to charge from a completely discharged condition to a fully charged state.
The Unication Alphanumeric line of pagers includes a holster and alkaline battery as standard pieces of the pager package. If lost or damaged, the holster can be re-ordered individually. Made of durable polycarbonate material, the holster has a semi-transparent smoke-black color and integrated belt clip. The holster’s transparency allows the user to read messages without removing the pager from the holster if that method is preferred. The holster is also designed for quick removal of the pager from the holster to read messages. Along with being an attractive accessory for all Unication alphanumeric pagers, the holster also protects the pager from scratches and general damage. The holster can be used interchangeably with any of the Unication alphanumeric pagers.
The UniMax Alert and Ring Tone Amplifier is designed to alert a pager or cell phone user to an emergency situation when not wearing their device or possibly asleep. The Amplifier has no electrical contacts, but is activated by sensing the audio alert of the pager or cell phone it is holding. The UniMax features 10 different audible alert tones that can be selected from a front panel pushbutton knob. A large red flashing LED serves as a visual alert when a call is received and will keep flashing as a reminder until reset. Once alerted, the UniMax’s alert tone volume will increase incrementally for 30 seconds until maximum volume is reached. The alert tone duration can be set to 1 minute, 3 minutes or continuous alerting through a 4-step slide switch. A mute position is also available.